If your brake line is broken, it means that you are going to meet with an accident sooner or later. Once this line loses its pressure, you will not be able to slow down your vehicle. This is why it is important to keep an eye on your brake line. If you live in an area with a lot of snow and ice, then you are more likely to experience this problem on a regular basis. In this case, it is safe to know how to repair these brake lines in order to ensure your own safety. The following are some tips that you will find useful when repairing leaking brake lines.
Assess the Situation
First and foremost, you need to learn the extent of the leakage. If you have jack stands, you need to raise the vehicle and place it on them. This will make it easier for you to locate the position of the brake lines. Once you spot the master cylinder, just go backwards. If you notice rust and leaking hoses, it means that your footbrake line is damaged. So, in order to stop the leakage, you will have to fix it immediately.
Remove the Brake Lines
Depending on the type of brake you have, the brake lines can differ. So, you need to be familiar with the right technique. For example, if you are using a combiflex brake in Philippines, then you need to learn how to replace its brake line. Using a tube cutter will enable you to cut through the footbrake lines easily. If it is difficult for you to remove the bolts, you might have to spray some rust remover over the bolts to remove them more easily.
Replace the Brake Lines
Once the brake lines are removed, you need to replace them immediately. You need to measure the size of the piece that you cut off and replace a footbrake line of the same measure. Remember that it is important replace the footbrake line from the same type. If you removed the brake line from a caliper brake, make sure to replace it with the same kind.
Fill Brake Fluid
You need to put sufficient levels of brake fluid into the master cylinder. It is important for you to use brake fluid from a reliable service provider. Do not opt for cheap qualities. You need to include brake fluid until there is good footbrake pressure.
Before you drive the vehicle again, you need to check if the leaking has stopped. If it has, then you can use your vehicle again.